Add Ethernet to Any CNC

LAN to CNCAdd Ethernet to Any CNC

The LAN Connect device acts as an interface between commercially available SD flash memory and any CNC control with an available RS232 port. Machine tool files can be sent from CNC memory to the LAN Connect device, SD memory to CNC memory or drip fed (DNC) from the SD memory. Flexible CNC communication firmware is built into the unit allowing connection to just about any machine tool control.

The LAN Connect device contains all the necessary hardware to integrate a universal display onto a CNC machine tool pendant. The controller is DIN rail mountable inside the pendant or can be reverse mounted on the display. A two (2)GB SD card is included and be upgraded by the end user to any size or brand desired to support larger NC programs/storage capacity.

The LAN Connect eliminates having to use DNC software and limitation of RS232 cables. The device connects to any standard Ethernet cable from the corporate network and is assigned an IP address. Using Microsoft Windows Operating System or FTP software, the NC program can directly load the files onto the SD card for the operator to use at the CNC machine. The CNC operator can select the file to transfer to the machine using the LCD display. Connecting the LAN Connect device to CNC controller allows the machine to run at its maximum baud rate and eliminates an operator from having to run back and forth from PC to machine to begin machine operation.

The benefits of this device has been said to reduce the cost of adding DNC Software required to communicate to machines and enable Ethernet cabling to be used as a standard on the shop floor. Ease of implementation and connection to the machine can be accomplished with IT Departments whom normally resist interfacing with CNC machines using serial cabling. The cost to add Ethernet functionality to any machine from the machine tool builder can be very expensive and now can be done at a minimal cost. The LAN Connect device works with any CNC control on the market with a serial port and been tested with Haas, Fadal, Mazak, Hurco, Yasnac, Cincinnati, Bridgeport, Mitsubishi, Mori Seiki, Siemens, Okuma, and others.

For more information contact our sales department by calling (877) 611-5825 or purchase the product here.