Serial Connect – RS232 Serial Cabling & Other Solutions
Our Serial Connect line is perfect for shop floors inclined to use a traditional RS232 cabling connection to machine tools. These products are compatible with new & legacy RS232 CNCs, serial equipment, point of sale applications, & other mobile devices. USB to Serial connection solutions are vast and affordable.
Link up via CAT5/6 Ethernet cables or direct ports to PCs, DNC RS232 to RJ45, & even with new laptops with only USB connections. We can connect you!
The USB-to-Serial converter is the perfect accessory for laptop computers that do not have a traditional 9pin RS232 port. Connect your CNC control to your computer using our RS232 serial cables & adapters – they are pinned & available in various lengths.
Not sure what Serial Connect solution is best for you and your equipment? Don’t guess. Stop crimping & soldering your own cables – let our team help!
Call (877) 611-5825 for more information.
USB to Serial Connect
- USB to Serial Adapter
- Supports Windows 7, Windows 8 & 10 – 32/64 bit
- CNC Control Compatible
- LEDs for indicating USB activity
- DB9 male connector for RS232
RS232 Serial Cables & Adapters
- Designed for Harsh Manufacturing Environments
- Low Capacitance
- Supports cable runs up to 300 feet with no data lost
- 3 Levels of Shielding
- 8 Conductors in the RS232 Serial Cable
- Multicolored
- Easy to swap out
- Male and Female
- 25pin or 9pin
LAN Connect
- Brings Ethernet functionality to any CNC machine tool with serial capability
- Drag & drop files to & from Windows Explorer to CNC
- Program files can be sent to/from the LAN Connect data server & any CNC
- Large files can be drip-fed directly from data server
- No special software required
LAN Connect – Remote Model
- NC programs transfer remotely from PC to Machine
- More operator control – no walking to PC
- Better access of files to those on the network
- No special software required
- Use FTP protocol & network cables for secure transfers
LAN Connect – Mazak Model
- Send & Save Mazatrol programs from Mazak machines
- Ethernet functionality for any CNC machine tool with serial capability
- Program files can be sent to/from LAN Connect data server & any CNC
- Drip-feed from data server, plus drag & drop files from Windows Explorer to CNC
- Ethernet connection using standard FTP protocol
LAN-USB Connect
- Connect via RS232 port – easy installation
- Drag & drop files from/to CNC data server
- Utilize Ethernet connection via FTP protocol
- CNC communication firmware built-in
- No special software required to install
Wireless Connect
- Same capabilities as Wired CNC Connect
- Monitor machines without the cost & worry of cables
- Can be easily mounted onto machines
- Move around your CNC machines without damaging or losing cables
Wired Connect
- Available in 1, 2, 4, 8, & 16 surge suppressed ports
- Run Cat5/6 Cabling to each device
- Assign a single IP address to the device
- Move a machine & simply reconnect cable
- Power from 110vAC, 12-48vDC, or custom RS232 cable