SFA Press Coverage

  • Manufacturing Trade Publications

    Two decades in Business. Check out our
    Case Studies, Editorials, Ads, & Press Releases!

20 years in business. 20 years of success stories. 20 years of insight.

Shop Floor Automations has been proudly featured in many manufacturing trade publications throughout the years. Check out our most popular stories below, and keep scrolling for more articles!

Most Popular Stories

MFG Engineering

IMTS Takes Center Stage

Manufacturing Engineering, August 2018 – IMTS 2018 Booth 133240

Shop Floor Automations will once again exhibit at IMTS. Booth 133240 will be the place to visit for shop floor productivity solutions.

Come to see Scytec DataXchange for real-time machine monitoring. Ask how to replace the floppy disk drive on your equipment. Add USB and Ethernet with our combo hardware.

Read about our solutions on pages 97 through 98, as well as our advertisement on page 103.

MMS

September Issue

Modern Machine Shop, September 2018 – IMTS 2018 Booth 133240 Show Preview

For Modern Machine Shop‘s September 2018 issue, our solutions that will be on display at IMTS 2018 are featured on page 136. Booth 133240 will be the location to get the following info:

  • Machine Monitoring Software from DataXchange – real-time machine data, Cloud-based & on-premise
  • CNC Floppy Drive hardware – replace using floppy discs on the shop floor
  • LAN-USB Connect – add USB and Ethernet to machines
MMT

September MMT Issue

MoldMaking Technology, September 2018 – IMTS 2018

MoldMaking Technology‘s features SFA in their September 2018 issue for our solutions at IMTS Booth 133240. Page 57 discusses the following manufacturing productivity tools:

  • OEE monitoring from Scytec DataXchange to help make CNC machines and other equipment less susceptible to downtime
  • CNC Floppy Drive hardware – replace shop floor floppy discs
  • Add USB and Ethernet to machines with combination hardware

We were also featured in their slideshow of notable products on display at the show!

cnc west

Shop Floor Automations at IMTS

CNC West, August/September 2018 – DataXchange & Hardware at IMTS 2018

“The Data Entry screen provides operators with a simple interface to track machine downtimes and will now include a ‘notes’ field to alert others on the shop floor of critical actions,” the press release from pages 95 to 97 states. “For example, the machinist can put in notes to alert the Programming or QA Departments on specific issues.” There is also an ad speaking about the benefits of machine monitoring on page 90.

manufacturing news

IMTS 2018 – Booth 133240

MFG News Magazine, August 2018 – DataXchange & Hardware solutions on display

The IMTS coverage has begun for MFG News. We thank them for sharing news of what we will have on display at the manufacturing technology trade show. Come to Booth 133240 to see new features from DataXchange Version 2018.04.10, ask about our Okuma floppy drive replacement, and learn about the LAN-USB Connect. Details about our solutions are on pages 76 and 77 of the MidWest edition.

Modern Machine Shop

IMTS 2018 Preview Issue

Modern Machine Shop, August 2018 – Information for the biggest MFG show around

For Modern Machine Shop‘s IMTS 2018 preview issue, we have the pleasure of appearing a few times in the publication. We appear in the list of exhibitors for IMTS on page 113 – at Booth 133240, we will have CNC hardware solutions such as CNC floppy drive replacements, RS232 to USB conversion units, and machine monitoring via DataXchange (read more about the software on page 252). We also have an advertisement informing readers about OEE monitoring benefits through SFA on page 250.

manufacturing news

Machine Monitoring Classes

MFG News Magazine, July 2018 – The DataXchange E-Learning program is discussed

MFG News dedicated an entire page in their Southwest issue about DataXchange’s E-Learning system! “In order to obtain the goals of lean manufacturing, overall equipment efficiency and increased machine capacity, the user needs to know the best ways to utilize DataXchange to make better shop floor decisions. With E-Learning, the user should be able to achieve the benefits of increased utilization and decreased downtime with proper use of the software.”

Manufacturing Engineering

Manufacturing Engineering

Manufacturing Engineering Magazine, July 2018 – An advertisement and interview are featured

In this issue, we placed an advertisement on page 22 that highlights some basic manufacturing productivity monitoring benefits.

We were also pleased the publication featured an interview with our resident hardware expert Guy Barrow, where he focuses on shop floor upgrades, pages 62 through 63.

cnc west

DataXchange E-Learning

CNC West, June/July 2018 – Machine monitoring learning system is featured

Page 54 highlights a piece from Shop Floor Automations detailing the DataXchange E-Learning program. “E-Learning is a series of online courses that DataXchange users can take at their own pace, at any time. Topics covered include: configuring reporting options, shift options, software installation, initial configuration, modifying existing machine data, system administration, and understanding the machine data collection sources”

Modern Machine Shop

New CNC Hardware

Modern Machine Shop, June 2018 – A full page feature on new SFA hardware

Thanks to Modern Machine Shop for having us in their 90th-anniversary issue the same year as our 20th anniversary! We were graciously given a full-page spread on our LAN-USB Hardware device, which adds Ethernet and USB to CNC machines.

mfg news

Add Ethernet, USB to CNCs

MFG News, June 2018 – Our hardware plus aerospace OEE monitoring are featured

Our new hardware device, the LAN-USB Connect, combines adding Ethernet to machines, as well as CNC to USB functionality.  The publication also highlighted our evaluation of why machine monitoring for aerospace manufacturers is crucial on the front page!

cnc west

Monitor Aerospace Production

CNC West, April/May 2018 – Machine monitoring for the aerospace manufacturing industry

Aerospace parts manufacturers are given the best reasons why monitoring their utilization will help with productivity. SFA also appears in an advertisement in this issue for our overall line of manufacturing productivity solutions.

SFA: Two Decades in Business

Modern Metals, April 2018 – SFA’s 20th anniversary as a manufacturing systems integrator

Shop Floor Automations is proud to have serviced the manufacturing industry for two decades and counting. Thank you to Modern Metals Magazine for publishing a press release about our 20th anniversary!

manufacturing news

Medical Manufacturing

MFG News, April 2018 – Machine monitoring for the medical manufacturing industry is highlighted

Making medical parts is a high volume industry. Machine monitoring overall equipment efficiency (OEE) is broken down into four parts: utilization rate evaluation, tracking more than downtime, what machines are eligible for the software, and how to use machine monitoring as a step towards lights-out manufacturing.

metalforming

Metal Forming Solutions

MetalForming Magazine, March 2018 – 20th anniversary of SFA features new logo and refreshed website

“Shop Floor Automations, La Mesa CA, a manufacturing integrator, announced its new website and logo as part of its 20th anniversary. The company specializes in assisting manufacturers to increase productivity. Solutions offered include DNC software, machine monitoring…improving legacy machines, and replacing old media.”

SFA in Manufacturing News

MFG News, March 2018 – 20th anniversary of Shop Floor Automations is discussed

“SFA technicians are well versed in dealing with CNC machines, as well as Industry 4.0 and protocols such as MTConnect. Customers of SFA also find themselves surprised when technicians can diagnose and fix other problems they were not even aware of previously. Technicians can also service customers over the phone and via remote services.”

Machine KPIs, CNC Metrics

Modern Machine Shop, February 2018 – Machine monitoring software benefits explored

“DataXchange machine monitoring system reduces downtime by providing live notifications of machine issues via text or email…dashboards enable manufacturers to communicate with employees about productivity…key performance indicators (KPIs) and overall equipment effectiveness data.” Also, see our advertisement on page 120.

Manufacturing Buyer’s Guide

Production Machining Magazine, January 2018 – Annual recommendations of what to invest in for the shop floor

Find Shop Floor Automations in the 2018 buyer’s guide under Software>CAD/CAM, Software>ERP & Other Shop Management. We are also located under Software>Data Collection Devices, as well as the general directory. The annual guide helps shop floor decision makers choose from a variety of productivity solutions.

modern machine shop

Monitor Machine Hog Outs

Modern Machine Shop, January 2018 – Machine data collection from SFA is featured

“Machine monitoring has been another important factor in R&D Manco’s success,” states MMS editor Peter Zelinski. “Gathering basic data on machine status, and studying the data to diagnose and remedy the causes of non-cutting time, has been the shop’s most powerful resource for realizing machining capacity improvements.”

mfg news

Top Utilization Monitoring Benefits

MFG News, October 2017 – SFA discusses top benefits of machine data collection

Among many machine monitoring benefits, the unexpected equipment that can be monitored is one. “We can work with manual machines, autoclaves, paint lines, PLC-driven machines and more,” said a company spokesperson. “Unconventional machine monitoring is something we are known for and can be an ideal solution for some companies.”

modern machine shop

Wireless CNC Hardware Case Study

Modern Machine Shop, October 2017 – Hardware helps manufacturer gain time daily

How did one manufacturer gain back 15% more time each day? “To keep his shop thriving, Mr. Stollen is committed to updating old, outdated and unreliable technology such as the flawed cable system for transferring data. Often, when he transferred CNC programs…only parts of the code would make it to the machine. Other times, none of the code would make it to the machines.”

Modern Machine Shop

Los Angeles Manufacturing Expo

Modern Machine Shop, September 2017 – SFA at WESTEC 2017

“Shop Floor Automations will display software and hardware solutions intended to help manufacturers increase productivity, OEE, and profits without buying new machines or downsizing their workforce in order to afford upgrades.” Article 

mfg news

Reasons for Machine Monitoring

Manufacturing News, August 2017 – Machine monitoring software ad

Reasons to invest in machine monitoring is discussed in an advertisement. We also had a brief overview of solutions we had on display at WESTEC 2017, such as CNC networking, OEE monitoring, floppy drive emulators, wireless CNC transfers, and more.

cnc west

West Coast Manufacturing Tech Expo

CNC West, August/September 2017 – WESTEC 2017 Manufacturing Show

“SFA will be displaying their USB to CNC hardware options, such as the Portable USB Connect. Connect your machines via Ethernet and Wireless
devices. One of their newest products, the WiFi USB Connect, is a solution for enabling old machines to wirelessly send and save programs.”

mfg news

Article on Wireless CNC Transfers

Manufacturing News, June 2017 – the WiFi USB product is explored

The WiFi USB product from Shop Floor Automations is highlighted in this issue of MFG News. If you wish you could transmit data from an old machine in your shop wirelessly but thought it was going to cost a great amount of money, get ready to be surprised.

moldmaking

Tip of the Month – Monitoring Moldmaking

Moldmaking Technology Magazine, May 2017 – monitoring the moldmaking process

“For mold manufacturing, these processes may take some time, maybe hours, to produce a single part. Mold shops need to know how long it is going to take to get that mold out the door and what may be preventing that from happening.” – Page 72

cnc west

CNC Floppy Drive Replacement

CNC West, April/May 2017 – Go wireless or replace floppy disks for machines

“The WiFi USB Connect allows machinists to access files via a shared network folder, eliminating the need to seek out a programmer for assistance…If being stuck with old media is a concern, machines that use floppy disks can be updated with modern devices.” – See our article on Page 73 and our advertisement on page 69

modern machine shop

Going Wireless for Older CNC Machines

Modern Machine Shop, May 2017 – The WiFi USB Connect device is profiled

“Shop Floor Automations offers a device that adds Wi-Fi to any machine via a USB port for data monitoring. Intended to serve as a cost-effective solution for older machines, the Wi-Fi USB Connect emulates a thumb drive and plugs into the USB port of a machine and enables it to connect wirelessly to a shared folder on the network.”

modern machine shop

Machine Monitoring – Anywhere, Anytime

Modern Machine Shop, March 2017 – Ad informing customers about machine monitoring

On page 109 in Modern Machine Shop for this issue, we ran an advertisement wishing to inform customers about the flexibility of machine monitoring software. The ad displays different ways that the software can be accessed, as well as being supported by the MTConnect protocol and machines of any make/age/model.

Houston TX MFG Tradeshow

Manufacturing News, February 2017 – Our solutions on display at HOUSTEX

Booth 1616 at HOUSTEX 2017 featured solutions such as hardware for CNC machines and machine monitoring software, G-code editors, machine program drip-feeding software, and more. We also had an ad in the publication for the show!

Easy Machine File Transfers

MoldMaking Technology, January 2017 – Big button interface for machine operators

“In addition to USB capabilities, Ethernet protocols include FANUC FOCAS, Windows Share and FTP. FOCAS allows file transfers to and from CNC memory…It also can be leveraged for machine monitoring in the future without the added cost of hardware.”

CNC Machine HMI Interface

Modern Machine Shop, January 2017 – Touch HMI provides overall ease of use

Predator Touch HMI through Shop Floor Automations was a hit product this month, with its capabilities to make all actions across the shop floor easier and more efficient. “While Touch HMI is the front end for machinists, multiple Ethernet protocols can be used on the back end.”

cnc west magazine

New Features for OEE Monitoring Software

CNC West, December 2016/January 2017 – New machine monitoring features available

“New features include an MTConnect Data Viewer…The Real-Time Viewer has been updated, adding the ability to copy RTV screens to groups or users, as well as new reports and charts like Operation Time, plus the OEE Equipment Summary. ” – Page 66

moldmaking technology

PC to CNC Transfers

MoldMaking Technology, December 2016 – USB device for wireless transfers

“Shop Floor Automations (SFA) has re-branded its hardware line of products as the Connect Series and is in the testing stages for its latest release, the WiFi USB Connect, a wireless USB solution for the shop floor. The device emulates a USB stick, allowing the user to share data between a PC and a machine with a USB port.”

mfg news

Machinist Comic Strip

MFG News, December 2016 – Manufacturing comic strip character Shop Floor Man debuts

“You have middle school kids, high school teens and college-aged young adults who we are trying to get into this industry, or people like the military veterans being trained…These people of these various age groups are attached to their devices and social media – we can reach them and show them this industry is a community.”

the fabricator

CNC Wireless USB

The Fabricator, November 2016 – Hardware accomplishes PC to CNC machine abilities

“Gives wireless abilities to floppy drive emulators and CNC machines with a USB port…Data sources include network shares, FTP, email, SMB, and Cloud services. Users will see the files at their machines on the USB as soon as they are added to the shared folder. They will not need to walk to the programmer or find them to get needed answers.”

cnc west

FABTECH 2016

CNC West, October/November 2016 – SFA at FABTECH 2016 in Las Vegas

“Booth #C13109 will present their many manufacturing munitions at FABTECH. SFA will inform attendees about…Predator Software updates, with specific solutions for machine monitoring, DNC communication, CNC program editing, document control, and tool management, will soon be available to view at FABTECH.” Page 88 as well as an ad on Page 70

modern machine

Fabrication Productivity

Modern Machine Shop, October 2016 – SFA at Tradeshow for Fabricators

“Shop Floor Automations will display a variety of products, including the Predator Touch HMI [at FABTECH 2016]. According to the company, the device replaces barcode readers, handheld terminals, and proprietary shopfloor hardware; simplifies data collection on machine uptime; enables access to information via tablet, PC or CNC.”

manufacturing news

SFA in MFG News

MFG News, October 2016 – Touch HMI is once again featured in this publication

“Using Touch HMI’s big button interface, operators can enjoy features that simplify sending and receiving programs to and from machines. For shops employing machine data collection, they can put in downtime codes that the operators can choose, such as set up or preventative maintenance, for example.”

imts 2016

IMTS 2016

MFG News, September 2016 – Exhibiting at IMTS & a new hire for SFA

SFA once again was an exhibitor at IMTS, which is the biggest manufacturing technology tradeshow in the United States. SFA displayed many solutions at Booth E-3240, including Predator Software, DataXchange machine monitoring, and CNC hardware. MFG News also published a piece announcing the hiring of our Marketing Coordinator.

mfg news

Manufacturing Systems Integration Exhibitor

Manufacturing News, August 2016 – International Manufacturing Technology Show

Shop Floor Automations, Inc. once again exhibits their solutions at IMTS in Chicago. The Predator Software Suite, Scytec DataXchange machine monitoring, and hardware solutions were on display. Attendees can check out their booth for increases in manufacturing utilization, productivity, and profits.

moldmaking process

Moldmaking OEE Monitoring

MoldMaking Technology, March 2016 – Monitoring the moldmaking process

“Scytec DataXchange software from Shop Floor Automations (SFA) is a machine monitoring software that provides detailed data collection and real-time reporting on a dashboard, enabling users to instantly track productivity, and plan for increased efficiency and time savings on the shop floor.”

modern machine shop case study

CNC Machine Monitoring Cover Story

Modern Machine Shop, February 2016 – Machine monitoring helps with productivity and downtime

“Implementing machine monitoring software…was an almost immediate 5-percentage-point improvement in measured performance. That boost was the early return on [investment] simply paying attention to this performance for the first time.”

industry 4.0

Hardware for Lights Out Manufacturing

MOXA Case Study, 2016 – SFA Hardware networks CNCs to machine monitoring system

“With a combination of hardware and software, a CNC monitoring system would collect, analyze, and visualize the necessary performance metrics.”

Want free press coverage?

Do a case study with Shop Floor Automations!

All it takes is a 15-minute phone call & submitting photos.

Your company gets final approval of the piece.

Ask us for more info and schedule a session today!

Thanks to these Digital Publications