Will your floppy drive emulator work on my CNC Machine?
Your floppy drive emulator will work with your CNC machine so long as you are using standard DOS-readable disks. There is a 99% chance that the Floppy Drive Emulator, previously known as the FD Connect, will work. Please provide the make and model of your current floppy drive and confirm you can read the floppy disks in a Windows or DOS PC, and Shop Floor Automations can tell you which FD Connect model will work for your CNC Machine.
When ordering the non-Haas specific emulator, please provide your Salesperson with the make and model of your current floppy drive and confirm you can read the floppy disks in a Windows or DOS PC, and Shop Floor Automations can tell you which model will work for your CNC Machine.
More info on the floppy drive emulator via the Floppy Connect page:
Our Floppy Drive Emulator, available in two models, acts as a Floppy USB Emulator, is easy install, requires no system configuration or debugging, & replaces the need for floppy disks, which are very difficult to obtain. The drive emulates your existing floppy drive & acts as if the floppy drive was never removed. Works with almost any existing 720k/1.44MB capacity DOS format floppy drive. 28 or 32 pin ribbon cables systems are supported & will connect to your existing power cable.
Works in PCs & in CNC machinery such as Haas, Mazak, Fadal, Mitsubishi, Omniturn, Centroid, Robots, Flame Cutters, & Greco boxes, with new models being added to our compatibility list monthly!