Floppy Drive Emulators for Haas

Replaces the floppy disk drive in your Haas machine
Add USB capabilities to your Haas

Haas Floppy Drive Emulator

  • Haas compatible, Plug and Play model
  • Replace old Floppy disks with a USB Flash drive & still maintain Floppy procedures
  • Slide old floppy drive out of the HAAS & slide in the SFA Floppy Emulator
  • Hold the same amount of Data on a USB drive that Floppy disk could
  • Add USB to your old Haas at a low cost

Please give us a call to purchase.

Haas Floppy Emulator for Haas CNC Machines

Our Floppy Drive emulator works on numerous Controls. However, because of the “Plug-and-Play” nature of the Floppy Emulator on Haas CNC Machines, we are able to provide this price online for customers who do not need any support with the Haas Floppy Emulator.

It is easy to install and requires no system configuration or debugging. For other controls, please contact our Sales Department. The drive emulates your existing floppy drive to act as if the floppy drive was never removed.  Will not increase your drive space.

What USB sticks will work with the Haas Floppy?

  • Any brand USB stick
  • Maximum storage of 2GB
  • FAT or FAT16 format

The order of this floppy connector to USB comes with a printed setup guide and a 1GB USB Flash Drive, for your convenience. The Floppy Emulator will not increase your drive space.

The $275 price is only for Haas machines. Space is limited to 1.44MB 

Want more info, but you’re not ready to request a quote? Sign up for a hardware info request!

Reminder: This device is not a Haas memory upgrade. It will act as a Floppy to USB solution, replaces Haas floppy drives, and replaces the need for floppy disks.

 Call for more info at (877) 611-5825

Our Haas Floppy Connect made an appearance in a Today’s Medical Developments case study. Check it out!

Fredon Corporation Case Study