General Information

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Cloud/Monthly Machine Monitoring

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

DNC Software

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

On-Premise Machine Monitoring

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

CNC Editor

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

MTConnect

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Fanuc FOCAS

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Shop Floor Hardware

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Floppy Drive Emulators

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

RS232 Serial Cabling

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Predator Software

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.

Manufacturing Document Control

Yes – leveraging the Xmodel protocol built into your CNC with DNC software is the best protocol to use for error correction transfers.

Category: DNC Software

Mazatrol is a proprietary conversational programming language that is standard on all Mazak mills and lathes. It is primarily used for 2 & 2 1/2 axis work and is especially popular for turning applications.

It has a different format than G-code programming and is supported by Predator DNC by using the Mazatrol link in your commands.

Predator DNC supports FTP (File Transfer Protocol) as well as Windows Share (mapped drives) for communication to the CNC.

The advantage of using this connection is faster speed and ease of connection to the network. The machine will require configuration from your network administrator to provide IPs, drive letters, user and permission controls. Some corporate networks do not allow this equipment to be connected through FTP due to security issues and potential risk of viruses.

Furthermore, most operating systems on CNCs are out-dated running Windows 95, 98, Server 2000 or NT. Updates to the operating system are not permitted typically from the machine tool builder, unlike computers used in the office.

Due to issues such as these, Predator DNC software now also supports Secure DNC, which allows encrypted communication via only two TCP ports. It can also transmit not only main programs but also subprograms and library programs to the correct folders in your CNC working memory and/or hard drive. It supports operating systems as old as Windows 95 and has extremely minimal system requirements that essentially any Windows-based CNC can meet.

It is also worth noting that Predator DNC now supports Fanuc FOCAS communication, which can rapidly send programs directly in and out of Fanuc i-Series controls. This is done without any action needed at the CNC itself, unlike older Serial send/receive processes. Moreover, Predator DNC now also supports Ethernet-based communications for DMG Mori (formerly Mori Seiki) machines running MAPPS versions II, III, and IV. This, in a fashion very similar to Fanuc FOCAS, allows programs to be sent in and out of CNC controllers, over the network, without any operator input needed at the machine.

Category: DNC Software

No. The first Windows 7 version compatible of Predator DNC is Version 9. However, version 9 and version 10 are both compatible with Windows 8 and 8.1.

If you have an older version but would like to use Predator DNC on a Windows 7 machine, call us!

Yes, numerous software upgrades are available from any level of Predator DNC Hardware. Upgrades depend on each type of hardware.

The Connect series of hardware from SFA is designed to add ports at any time and offers a very easy upgrade path. Contact us to ensure there are no issues.

Yes. Haas CNC’s can communicate to Predator DNC Software using serial RS232 connection or FTP.

Haas FTP is also supported through Predator DNC to enable faster communication. Each Haas control can be configured in the software and can be configured for any method.

Predator DNC communicates up to 115K baud rate to the Haas using Xmodem and hardware handshaking.

DNC Objects are software options that extend Predator DNC for special customer applications.

DNC Objects can add databases, spreadsheet, and email connectivity, improve high-speed machining, offer greater lights out reliability, automatic error correction, and support for proprietary CNC controls. Predator DNC Objects support any RS232 hardware including DNC bundles, Flex series, and PC COM ports.

A DNC Object development kit is available for even further customization or integration.

NOTE: Predator DNC Clients usually do not require DNC Objects.

Category: DNC Software

Yes, Predator DNC supports long filenames, long directory names, names with spaces, shared network drives, and UNC names.

Refer to the following examples:

  •     Job 1234.NC
  •     H:CUSTOM PARTSJOB 4567.NC
  •     \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC

Predator DNC can also automatically name your files when uploading to the server. They can be “auto-named” using their O-number, a user-chosen name, the first comment in the file, and so on.

Yes, Predator DNC does support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files directly from the CNC control.

Category: DNC Software

The Predator CNC Editor bundled with the DNC Networking Software is controlled by the license of the Predator DNC Software. The SIM and the serial number from the DNC will enable the full version of the CNC Editor.

Currently, there is no option to split the seat from the DNC Networking license. However, you may install the Predator CNC Editor on as many PCs as you wish and use the “light” version of the product for general editing purposes.

A stand-alone full version is available if needed. Contact our sales department.

Categories: CNC Editor, DNC Software

The CNC Editor will support communications up to a baud rate of 19,200. The communication can be configured for hardware, software, or both flow control along with various data bits, stop bits and parity.

If you want to communicate to your machines faster, then talk to our Sales department about purchasing Predator DNC software.

Categories: CNC Editor, DNC Software

Yes, Predator CNC Editor supports an unlimited number of different machines and can communicate with multiple machines. Each machine can have unique COM port, baud rate, and numerous other properties. The Editor supports switchboxes, intelligent switchboxes, and the entire line of Predator DNC and Connect AKA FlexN hardware.

NOTE: The Predator CNC Editor can only communicate to one machine at a time and is not designed for simultaneous multitasking operations to multiple machines. If this is desired, upgrade to Predator DNC, which is designed to support machines simultaneously.

Categories: CNC Editor, DNC Software

No, CNC Editor does not support Remote Request. Remote Request eliminates walking back and forth and allows operators to request files from the CNC control.

If this is desired, upgrade to Predator DNC software, which is designed to support Remote Request for up to 1024 machines simultaneously.

Share this entry
Categories: CNC Editor, DNC Software

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem with this system is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with these systems. Whoever saves the file last wins!

Most revision control software packages use a database for the backend to store “links” or flags to shared files and reference the actual file.  The problem is that while you might have the NC program and can place it in a database for check-in and check-out, there is no control with this system. Whoever saves the file last wins!

With a true PDM system, complete revision control, lockout, and access only can be obtained by a single user until completed.  This eliminates changes of multiple file revisions – they will be unapproved.

More on Predator PDM:

  • Paperless manufacturing-driven Production Data Management
  • Designed to organize & control CNC programs
  • Master your setup sheets, safety procedures, quality documents, & more
  • Complete revision control
  • Integration with DNC, CNC Editor, Virtual CNC, MDC & Tracker.

Predator PDM includes best practice workflow wizards for release, unreleased, revise, rollback, check-in, and check out. Every wizard honors user and group permissions and includes ISO 9000-style history.