- Customer Reviews (0)
Send and save Mazatrol (CMT) programs off of Mazak Machines with the LAN Connect Mazak model. The LAN Connect is designed to operate with standard software that comes with a PC (such as Internet Explorer from Microsoft). No additional licenses or additional interface software are required. The data server will look like a FTP hard drive on your network.
Programmers: simply drag and drop a file from your PC to the data server. Once loaded on the server, the operator can load the file into CNC memory or drip-feed a program directly from the data server without using network resources. Ask us how the data server can easily be made wireless by adding low cost off-the-shelf wireless bridges.
The standard capacity for this model is either 4GB or 8GB memory cards with no special software required. The product has 10/100 Ethernet Speed, with a low-cost wireless option also being available.
If you do not have a Mazak machine, refer to the standard LAN Connect here and the LAN Connect Remote Model here for more operator control. We also have an insightful article you can read by clicking here that details more info on the device, with facts like this:
The LAN Connect device acts as an interface between commercially available SD flash memory and any CNC control with an available RS-232 port. Machine tool files can be sent from CNC memory to the LAN Connect device, SD memory to CNC memory or drip fed (DNC) from the SD memory. Flexible CNC communication firmware is built into the unit allowing connection to just about any machine tool control.
More about Hardware from Shop Floor Automations –
Do you have a small shop? A large shop? Regardless of your number of machines, or types of controls, SFA has you covered with a complete hardware connectivity suite. Don’t shop around & waste time trying to find the lowest prices – using our 18 years of experience & full support (onsite & digital) will pay for itself with working solutions.
We make our own cables & regularly test hundreds of models of controls with our equipment to confirm what works with wired, wireless, USB, & floppy disk drives for CNCs to eliminate downtime. If you’re ready to get connected, jump over to our online store or call us today!
Call for more info at (877) 611-5825