Predator Software Inc logo, which is a blue gear with a bear pawprint in the center.

Predator EditLock

EditLock Key Features

  • Control Edits of G-Code on machine tools, Eliminate Physical Edit Keys, & more
  • Set up as a single, standalone EditLock command
  • Can be set up as an automated function (File Load command in Predator DNC)
  • Enables CNC’s EditLock Key switch functions to be controlled via Predator DNC & PDM commands

Features

  • Control Edits of G-code on machine tools for improved CNC revision control
  • Eliminate Physical Edit Keys
  • UnLock > Send to CNC > Lock
  • Automatic Cycle Start Lock
  • Report Lock and UnLock Activity
  • Integrates with Predator DNC
  • Integrates with Predator PDM
  • Lock and UnLock CNC Machines from Predator DNC & PDM
  • Extends CNC File Management
  • Supports most CNC Machines with EditLock key switches
  • Maintenance Disconnect
  • Easy DIN Rail Mounting

Other reasons to use EditLock

  • Works with any CNC control that has an “EditLock” or “Memory Protect” key switch.
  • Installs in machine CNC cabinet.
  • Maintenance toggle switch to enable the system to be deactivated.
  • Option to tie in Cycle Start signal.
  • Remote controlled via Predator DNC or Predator PDM.
  • Enables logging of when the control is locked or unlocked by an operator on the floor.
  • EditLock Unit can be externally powered via the110/240VAC (input) power supply, or directly powered via an internal24VDC power source inside the machine tool cabinet.
  • EditLock Unit has optional 5VDC, 12VDC and 24VDC relays for input and output signals.
  • The PCL Control holds the Ladder program that determines the function of the unit.
  • The Disconnect Toggle Switch enables the end-user to switch between the hardware switch on the control (original OEM functions) and software control in Predator DNC and PDM.
  • The INPUT Relay(s) are used to capture the Cycle Start signal(s) from the CNC machine control.
  • The OUTPUT Relay(s) are used to control the EditLock functions when the unit is under software control.

Predator EditLock Operation

Enables the EditLock Key switch functions on the CNC to be controlled via commands in the Predator DNC and PDM Software. It can be set up as a single standalone EditLock command, or as an automated function that is part of the File Load command in Predator DNC.

Operator Procedure

Scan bar code on the traveler containing the NC program name and select “Read or Input” on the CNC control to receive the part program, which is loaded into the controller. Optionally, change program offsets and then press Cycle Start. No further edits can be made.

Management Procedure

Use a bar code to force the EditLock to “unlock” to enable the modification of the NC program when necessary or allow offsets to be changed. Optionally, use the DNC client or PDM interface to trigger as well.

Eliminate the operator from modifying the proven NC program that’s signed off and being “tweaked” on the shop floor. Every transfer to the machine using the Predator EditLock System is logged to generate a report when the device is locked and unlocked, and data is transmitted to the machine tool. The solution extends CNC file management and compliance with ISO standards used in the aerospace, automotive, and medical industries.

Got a question about this product?

Visit our FAQ section or Contact Support!

Predator Software Reseller SFA

For more information from the #1 reseller of Predator Software, please call (877) 611-5825