How is RS232 cabling pinned out, and what does each pin do?

How is RS232 cabling pinned out? What does each pin do?

 

 

The number preceding each signal name corresponds to the pin number defined in the standard.

DB9

  1.     Received Line Signal Detect (Carrier Detect)
  2.     Received Data
  3.     Transmitted Data
  4.     Data Terminal Ready
  5.     Signal Ground
  6.     Data Set Ready
  7.     Request to Send
  8.     Clear To Send
  9.     Ring Indicator

DB25

  1.     Protective Ground
  2.     Transmitted Data
  3.     Received Data
  4.     Request to Send
  5.     Clear To Send
  6.     Data Set Ready
  7.     Signal Ground
  8.     Received Line Signal Detect (Carrier Detect)
  9.     +P (for testing only)
  10.     -P (for testing only)
  11.     (unassigned)
  12.     Secondary Received Line Signal Detect
  13.     Secondary Clear To Send
  14.     Secondary Transmitted Data
  15.     Transmission signal element Timing
  16.     Secondary Received Data
  17.     Receiver Signal Element Timing
  18.     (unassigned)
  19.     Secondary Request To Send
  20.     Data Terminal Ready
  21.     Signal Quality Detector
  22.     Ring Indicator
  23.     Data Signal Rate Selector
  24.     Transmitter Signal Element Timing
  25.     (unassigned)

When selecting a vendor for your shop floor automation needs, it is important to select a company that is committed to service and support. Our client list continues to grow through recommendations from our customers, as well as our partners. You can speak to a real person over the phone with us, versus sending emails or leaving messages on a cell phone, then waiting for a response. The information contained on these pages is intended to give you direct access to the latest software revisions, support options and technical documentation available!

Need to speak to an expert? Contact our support team by calling (619) 461-4000 and ask for technical support. Our Application Engineers can answer your questions, guide you through an installation, or remotely configure and trouble shooting a current system. NOTE: Normal business hours are 6 a.m. to 5 p.m., Monday through Friday, Pacific Standard Daylight Time. See After-Hours Support info below.

Click here to see our Support options!